Why is my stove oven not heating but the burners work?+
The oven igniter (gas) or bake element (electric) has failed — the stovetop and oven use separate heating systems. On gas ranges, the oven igniter has (separate from the stovetop ignition). On electric ranges, the bake element has burned out. These are independent components — one can fail while the other works fine. Igniter: $100–$200. Bake element: $100–$200. Treasure Coast Appliance Repair carries both.
Why is my stove burner flame uneven?+
Uneven flames on a gas stove are caused by clogged burner ports (most common), a misaligned burner cap, food debris under the burner, or a damaged burner base. Remove the burner cap and grate, clean the ports with a pin or needle, wipe the burner base, and reassemble carefully. The cap must sit flat and centered for an even flame ring.
Why does my electric stove burner only work on high?+
An electric stove burner that only works on high (or doesn't have variable heat control) has a faulty infinite switch. The infinite switch controls heat by cycling the element on and off at different rates. When it fails, it typically sends full power (high) or no power. Infinite switch replacement costs $80–$150 at Treasure Coast Appliance Repair.
How much does stove repair cost in Stuart?+
Most stove/range repairs in Stuart cost $80–$350. Burner element (electric): $50–$120. Infinite switch: $80–$150. Gas burner/igniter: $80–$150. Oven igniter: $100–$200. Bake element: $100–$200. Oven temperature sensor: $80–$150. Control board: $200–$400. Treasure Coast Appliance Repair provides upfront pricing.
Should I repair or replace my stove?+
Stoves/ranges last 13–18 years. Under 10 years: almost always repair. 10–15 years: repair for issues under $300. Over 15 years with a major failure: consider replacement. Freestanding ranges are easier and cheaper to replace ($500–$1,500) than built-in units. If the oven and stovetop both work but one has a cosmetic issue, repair is almost always worth it.
Why does my gas stove keep clicking?+
Continuous clicking after the burner is lit means moisture is on the igniter. Boilovers, cleaning, and even Florida humidity can cause this. Dry the igniter area with a towel and let it air dry. If clicking persists when everything is dry, the igniter switch for that burner has failed. Switch replacement costs $60–$100.
Why does my stove make a popping noise?+
Popping sounds from a stove are caused by thermal expansion (metal heating and expanding — normal), a loose burner cap rattling, or food debris crackling on a hot element. On electric stoves, a popping sound with visible sparking from an element means the element is shorting and needs replacement immediately.
Who offers stove repair near me in Stuart?+
Treasure Coast Appliance Repair provides expert stove and range repair in Stuart, Stuart, Jensen Beach, Fort Pierce, Palm City, Vero Beach, Sebastian, and surrounding Treasure Coast areas. We service gas, electric, and dual-fuel ranges for all major brands. Same-day service available. Call (772) 353-5791.
How long does stove repair take?+
Most stove repairs take 30 minutes to 1.5 hours. Burner element or infinite switch: 30–45 minutes. Gas igniter replacement: about 45 minutes. Oven-related repairs: 45 minutes to 1.5 hours. Most repairs are completed during the first visit. If the range needs to be pulled out from the wall, add 15–20 minutes.
My Samsung range shows error code E-08 — what does it mean?+
Samsung range error E-08 indicates a faulty cooktop temperature sensor — the cooktop surface is overheating or the sensor is reading incorrectly. Turn off the range and let it cool completely. If the error returns after cooling, the temperature sensor needs replacement. This is a safety feature preventing the glass top from overheating.
My GE range burner won't turn off — what should I do?+
A burner that won't turn off has a stuck or failed infinite switch (sends continuous power to the element). Turn off the range at the circuit breaker immediately. Do not leave it unattended. The infinite switch needs replacement — $80–$150. This is a safety issue that should be repaired promptly.
Does Florida heat affect my gas stove?+
Florida's heat doesn't directly affect gas stoves, but humidity can corrode burner ports, cause igniter misfires, and promote rust on metal components. Power surges from storms damage electronic ignition modules and control boards. Clean burner ports regularly and use surge protection on the circuit. Coastal salt air accelerates corrosion.
What stove brands are the most reliable?+
Based on our 17 years of repair data, GE and Whirlpool gas ranges are the most reliable. For electric ranges, GE, Whirlpool, and Frigidaire are dependable. Samsung and LG ranges have more features (air fry, Wi-Fi) but have more electronic issues. KitchenAid and Maytag (both Whirlpool-made) are solid mid-to-high range options.
Can I convert my gas range from natural gas to propane?+
Yes. Most gas ranges can be converted using a conversion kit (sometimes included with the range). The conversion involves swapping the gas orifices for all burners and the oven, and adjusting the pressure regulator. This should be done by a professional — improper conversion can cause dangerous gas leaks or inefficient combustion. Conversion costs $80–$150 for labor.
How do I clean gas stove burner grates?+
Remove grates and soak in hot soapy water for 30 minutes. Scrub with a non-abrasive pad. For stubborn grease, soak in a baking soda paste (3 parts baking soda, 1 part water) for 2 hours. Rinse and dry completely before replacing. Never put grates in the dishwasher unless the manufacturer specifically allows it. Cast iron grates should be lightly oiled after cleaning to prevent rust.
How much does it cost to replace a gas stove igniter?+
Gas stove burner igniter replacement costs $60–$130 per burner. If only one burner isn't sparking, the individual switch is likely faulty. If all burners fail to spark, the spark module (which powers all igniters) has failed — $80–$130. Oven igniter replacement is separate and costs $100–$200. These are straightforward repairs we complete same-day.
Why is my stove oven not heating but burners work?+
A stove oven not heating but burners work is caused by a failed bake element (electric) or a weak oven igniter (gas) — the stovetop and oven have separate heating systems. Treasure Coast Appliance Repair diagnoses and repairs this issue daily in Stuart and surrounding areas. This repair costs $100–$250. Call (772) 353-5791 for same-day service.
How much does it cost to fix a stove that is oven not heating but burners work?+
Fixing a stove that is oven not heating but burners work costs $100–$250 in Stuart. The final price is set by which specific part failed — Treasure Coast Appliance Repair provides an upfront quote before starting any work. The diagnostic fee is credited toward your repair cost. Call (772) 353-5791.
Why is my stove burner flame is yellow or orange instead of blue?+
A stove burner flame is yellow or orange instead of blue is caused by clogged burner ports restricting proper air-gas mixture, or the air shutter needs adjustment. Treasure Coast Appliance Repair diagnoses and repairs this issue daily in Stuart and surrounding areas. This repair costs $80–$150. Call (772) 353-5791 for same-day service.
How much does it cost to fix a stove that is burner flame is yellow or orange instead of blue?+
Fixing a stove that is burner flame is yellow or orange instead of blue costs $80–$150 in Stuart. The final price is set by which specific part failed — Treasure Coast Appliance Repair provides an upfront quote before starting any work. The diagnostic fee is credited toward your repair cost. Call (772) 353-5791.
Why is my stove oven door won't close properly?+
A stove oven door won't close properly is caused by bent or worn hinges, a broken door spring, or a warped door from self-clean cycle heat. Treasure Coast Appliance Repair diagnoses and repairs this issue daily in Stuart and surrounding areas. This repair costs $80–$200. Call (772) 353-5791 for same-day service.
How much does it cost to fix a stove that is oven door won't close properly?+
Fixing a stove that is oven door won't close properly costs $80–$200 in Stuart. The final price is set by which specific part failed — Treasure Coast Appliance Repair provides an upfront quote before starting any work. The diagnostic fee is credited toward your repair cost. Call (772) 353-5791.
Why is my stove temperature knob won't turn?+
A stove temperature knob won't turn is caused by a stripped or cracked knob, or a seized valve stem underneath — do not force it. Treasure Coast Appliance Repair diagnoses and repairs this issue daily in Stuart and surrounding areas. This repair costs $40–$100 for knob, $100–$200 for valve. Call (772) 353-5791 for same-day service.
How much does it cost to fix a stove that is temperature knob won't turn?+
Fixing a stove that is temperature knob won't turn costs $40–$100 for knob, $100–$200 for valve in Stuart. The final price is set by which specific part failed — Treasure Coast Appliance Repair provides an upfront quote before starting any work. The diagnostic fee is credited toward your repair cost. Call (772) 353-5791.
Why is my stove oven light won't turn on?+
A stove oven light won't turn on is caused by a burned-out bulb (most common), a faulty light socket, or a broken door switch. Treasure Coast Appliance Repair diagnoses and repairs this issue daily in Stuart and surrounding areas. This repair costs $30–$80. Call (772) 353-5791 for same-day service.
Showing 25 of 61 questions. Call (772) 353-5791 for answers to any appliance question.
